More
Wood Veneer Products:
Cabinet
Refacing PSA Veneer and Laminate Sheets
The PSA veneer makes refacing cabinets easy! (Note:
you should first complete installation of end (panels). Start with
the stiles (vertical surfaces). Cut slightly wider than stile (leaving
an overlap), and line up edge with top of the stile. Peel off backing
and press as you go. Trim off the excess veneer. Finish by using
veneer smoothing blade for optimal adhesion. Repeat the procedure
on the rails (horizontal surfaces).
Details
>>
Allwood
Two Ply Veneer
Get a superior flexibility with A grade veneer
laminated to a wood of the same or similar species. Because it is
a bit thicker than many veneers, you will get a more luxurious appearance-
and no black line. Telegraphing and checking are eliminated. And
it is pre sanded, so you can virtually apply and finish.
Details
>>
Woodprint
Veneer
You can now create unique, personalized and custom
products! This is a wonderful new product! Using a standard inkjet
printer, with no modifications or special inks you can print directly
on WOOD VENEERS! You can print any image in full COLOR! Along with
the available veneers, plus your creative mind and software - the
sky is the limit!
Details
>>
Spanish
Cedar Veneer
Spanish Cedar Veneer is 10 mil paper backed. Size
is 24'' X48''
Details
>>
Custom
Cut-to-Fit Cabinet Plywood End Panels
These cut-to-fit panels are designed to match
our custom doors and drawer fronts. Each panel is made of available
in Maple, Red Oak, Ash, Cherry, Hickory and Matte White laminate.
Details
>>
Pressure
Sensitive Edgemate
Permanently
bonds without an iron or glue. Real birch and oak edging gives panels
the look of solid wood. Metallic finished edging vividly accents
laminated tops.
Details
>>
Plastic
T-Molding
Use
3/4'' molding for plywood, and 13/16'' molding for laminated sheet
goods. 3/4'' wide molding requires a 1/16'' kerf. 13/16'' molding
requires a 5/64'' kerf.
Details
>>
Economical
Plyedge
Real
wood veneer finishes beautifully. Apply with standard woodworking
glue.
Details
>>
Plastic
Edgemate
Two ply
polyester Edgemate with a hot melt adhesive backing.
Details
>>
13/16''
Edgemate Real Wood Edging
Just position edge banding and heat with either
our hand held iron or edge banding machine. This item backing creates
a permanent bond. Then simply cut and trim edging to make plywood
look like solid stock.
Details
>>
1-9/16''
Edgemate Real Wood Edging
Just position edge banding and heat with either
our hand held iron or edge banding machine. This item backing creates
a permanent bond. Then simply cut and trim edging to make plywood
look like solid stock.
Details
>>
Gummed
Veneer Tape
3/4'' wide by
650 feet long. Maximum visibility tape has three holed pattern for
clear viewing of joint.
Details
>>
Veneer
Accessories
Starter Veneer
Kit - 25 square feet of assorted veneers: Birch, Oak, Cherry, Walnut,
and Mahogany. Random sizes 3'' to 8'' wide and 24'' to 36'' long.
A perfect assortment for veneer repairs on smaller pieces of furniture.
Thicknesses may vay from 1/32" to 1/28".
Details
>>
Hot
Melt Adhesive
A convenient,
no mess, sheet adhesive which is ideal for applying flexible veneer
on smaller projects. Just place on substrate, position veneer and
heat with a household iron. It's that easy! Available in 24'' width.
Sold by the linear''.
Details
>>
|
